Fox Flexy – Articulated 3D Printable Fox | Print-in-Place | No Supports STL Doğrulanmış
Satıcı: Extr3Diy · Durum: Yayında · Sürüm: v1 · Kategori: Karakter & Figür
Açıklama
Bring this adorable **Fox Flexy** to life with your 3D printer! This articulated, print-in-place fox is designed with smooth, flexible joints that create satisfying movement without requiring assembly.
Whether you're looking for a fun desk companion, a unique gift, or a charming display piece, this fox is easy to print and enjoyable for makers of all experience levels.
### Features
* 🦊 Print-in-place articulated design
* 🦊 No assembly required
* 🦊 No supports required
* 🦊 Smooth and flexible movement
* 🦊 Beginner-friendly print
* 🦊 Compatible with most FDM 3D printers
### Recommended Print Settings
* Layer Height: 0.20 mm (0.16 mm for extra detail)
* Nozzle: 0.4 mm
* Supports: **Not Required**
* Brim: Optional
* Infill: 10–15%
* Wall Count: 2–3
* Material: PLA recommended
* Print Speed: 40–60 mm/s
For the best results, let the print cool completely before gently flexing the articulated joints for the first time.
If you enjoy this model, please leave a rating and share your print. Happy printing!
Telefonda satın al, dosyayı daha sonra bilgisayarında indir.
Şimdi kaydet, baskıya hazır olduğunda bilgisayarında devam et.
Görseller
Dosyalar
Teknik Bilgiler
Dosya formatları3MF, STL
Toplam dosya boyutu117.9 MB
Dosya sayısı2
3D önizlenebilir dosya2
Poligon sayısıBelirtilmemiş
Yüzey detayı%100
Açıklama
Bring this adorable **Fox Flexy** to life with your 3D printer! This articulated, print-in-place fox is designed with smooth, flexible joints that create satisfying movement without requiring assembly. Whether you're looking for a fun desk companion, a unique gift, or a charming display piece, this fox is easy to print and enjoyable for makers of all experience levels. ### Features * 🦊 Print-in-place articulated design * 🦊 No assembly required * 🦊 No supports required * 🦊 Smooth and flexible movement * 🦊 Beginner-friendly print * 🦊 Compatible with most FDM 3D printers ### Recommended Print Settings * Layer Height: 0.20 mm (0.16 mm for extra detail) * Nozzle: 0.4 mm * Supports: **Not Required** * Brim: Optional * Infill: 10–15% * Wall Count: 2–3 * Material: PLA recommended * Print Speed: 40–60 mm/s For the best results, let the print cool completely before gently flexing the articulated joints for the first time. If you enjoy this model, please leave a rating and share your print. Happy printing!
Yorumlar ve Puanlar
Yorum yapmak için giriş yapmalısın.
Henüz yorum yok.