Fox Flexy – Articulated 3D Printable Fox | Print-in-Place | No Supports STL Təsdiqlənmiş
Satıcı: Extr3Diy · Vəziyyət: Yayımlandı · Versiya: v1 · Kateqoriya: Personajlar və fiqurlar
Təsvir
Bring this adorable **Fox Flexy** to life with your 3D printer! This articulated, print-in-place fox is designed with smooth, flexible joints that create satisfying movement without requiring assembly.
Whether you're looking for a fun desk companion, a unique gift, or a charming display piece, this fox is easy to print and enjoyable for makers of all experience levels.
### Features
* 🦊 Print-in-place articulated design
* 🦊 No assembly required
* 🦊 No supports required
* 🦊 Smooth and flexible movement
* 🦊 Beginner-friendly print
* 🦊 Compatible with most FDM 3D printers
### Recommended Print Settings
* Layer Height: 0.20 mm (0.16 mm for extra detail)
* Nozzle: 0.4 mm
* Supports: **Not Required**
* Brim: Optional
* Infill: 10–15%
* Wall Count: 2–3
* Material: PLA recommended
* Print Speed: 40–60 mm/s
For the best results, let the print cool completely before gently flexing the articulated joints for the first time.
If you enjoy this model, please leave a rating and share your print. Happy printing!
Telefonda al, sonra kompüterdə endir.
İndi yadda saxla, çap vaxtı kompüterdə davam et.
Şəkillər
Fayllar
Texniki məlumatlar
Fayl formatları3MF, STL
Ümumi fayl ölçüsü117.9 MB
Fayl sayı2
3D önizlənə bilən fayllar2
Poliqon sayıGöstərilməyib
Səth detalı%100
Təsvir
Bring this adorable **Fox Flexy** to life with your 3D printer! This articulated, print-in-place fox is designed with smooth, flexible joints that create satisfying movement without requiring assembly. Whether you're looking for a fun desk companion, a unique gift, or a charming display piece, this fox is easy to print and enjoyable for makers of all experience levels. ### Features * 🦊 Print-in-place articulated design * 🦊 No assembly required * 🦊 No supports required * 🦊 Smooth and flexible movement * 🦊 Beginner-friendly print * 🦊 Compatible with most FDM 3D printers ### Recommended Print Settings * Layer Height: 0.20 mm (0.16 mm for extra detail) * Nozzle: 0.4 mm * Supports: **Not Required** * Brim: Optional * Infill: 10–15% * Wall Count: 2–3 * Material: PLA recommended * Print Speed: 40–60 mm/s For the best results, let the print cool completely before gently flexing the articulated joints for the first time. If you enjoy this model, please leave a rating and share your print. Happy printing!
Şərhlər və qiymətləndirmələr
Şərh yazmaq üçün daxil olmalısınız.
Hələ şərh yoxdur.